Principle of the cast steel floating ball valve: This kind of floating ball valve has a ball supported by two valve seats. Under the medium pressure effect, a certain displacement can be generated by the ball itself so as to be pressed onto the seat seal
The high pressure die casting moulding process is used to create a wide range of products, from small electronic components and automotive parts to large engine blocks and structural components.
This series of hydraulic orbital motor, with its shell made of ductile cast iron of adequate intensity, can be applied to situations with less load and interval operation, widely to agriculture, forestry, plastics.
Inboard American type axle brake Shoes Holder six hole boring machine using six completed a one-time processing, high processing, high position precision, asbestos free friction plate, in line with international environmental standards.
(1) When the wheels are on the ground, unscrew the fastening nuts of the drive shaft and the hub.(2) Unscrew the fastening bolt on the shaft flange.(3) Separate the drive shaft from the flange.
NEMA 8micro stepper motorStep Angle 0.9°/1.8°(0.6°/1.2°)Step Angle Ettor 5% Temperature rise 80°C Max Service Environment Temperature -20°C~+50°CService Environment Humidity <85%RH Insulation Resistance 100MΩ Min 500VDCInsulation Dielectric Strength 600V
(1)15 seats Jinbei H1 with power steering,standard roof,gasoline.Displace ment 2.4L for gasoline.(2)Jinbei minibus with white color,dimension4970mm*1690mm*1935mm.
Standard Grade Standard Grade PTFE Coated Fiberglass/Glass Cloth possesses an optimal ptfe content, and leaves a middle fabric impression. As the most widely used ptfe coated fiberglass cloth, our standard grade cloth provides a superior smooth, non stick
Each die casting product must be passed the final test by the inspectors before leaving the factory.Variety is Complete and covering the main models.Adopt high quality materials to improve safety performance and service life.