The impact crusher is designed as a three-chamber crushing zone. It can crush all kinds of coarse, medium and fine materials with compressive strength not exceeding 350Mpa and side length of 100-400mm. The crushing ratio is large, and the finished product
304 stainless steel is a widely used chromium-nickel stainless steel, which has good corrosion resistance, heat resistance, low temperature strength and mechanical properties.
Compared with shower valve stem, it is shorter and lighter, but higher material request, some to valve stem are made by lead free brass. Assembly as following pictures
We are professional gabardine fabric manufacture, we havemore than 15 years for this item, It's one ofour main products, different composition 100% cotton and Tc , different 185gsm,195gsm,200gsm,230gsm,ect...All fabrics can be bleached,dyed and printed ,s
Drilling center, fixed column, travelling worktable structure. Complicated workpieces that need milling, drilling, boring, reaming and countersinking could be finished with one mounting. It is used widely in electronic and vehicle parts industries.
Materials:1. Layer ( BOPP,CPP,PE,CPE,PP,PO,PVC, etc.)2. Layers( BOPP/CPP or PE, PET/CPP or PE, BOPP or PET/VMCPP, PA/PE .etc.)3. Layers ( PET/AL/PE or CPP PET/VMPET/PE or CPP, BOPP/AL/PE or CPPBOPP/VMPET/CPP or PE, OPP/PET/PE or CPP, etc.)As your request.
NEMA 14 stepper motor Step Angle 0.9°/1.8°(0.6°/1.2°) Step Angle Ettor 5% Temperature rise 80°C Max Service Environment Temperature -20°C~+50°C Service Environment Humidity <85%RH Insulation Resistance 100MΩ Min 500VDC Insulation Dielectric Strength 600V
Material:Two Layers laminated materials optionKraft paper BOPP/CPP or PE (Transparent) PET/CPP or PE (Transparent)Matt BOPP /PE or CPP (Opaque) BOPP or PE /VMCPP(Metalized)NY/PE (Strong package)Three Layers option
Stainless plate stamping handwheel is made of high quality stainless steel material, which can be stored in air, steam, water and other weak corrosive media for a long time, and will not rust.
Thrust washers are long-wearing flat bearings in the shape of a washer that transmit and resolve axial forces in rotating mechanisms to keep components aligned along a shaft. Thrust washers are an economical alternative to rolling thrust bearings whenever