Send inquiry
Polyethylene Protective Tapes (T 200)
I Description
The T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine.
II Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
IVTechnical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
I Description
The T200 series is Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering.
The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine.
II Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
III Features:
Excellent adhesion to inner-layer tape and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
IVTechnical datas:
OUTER WRAP TAPE: XUNDA-T200 Series
Type | T 250 | T 265 | T 280 |
Total thickness | 0.51 mm | 0.65 mm | 0.80 mm |
Film | 0.38 mm | 0.51 mm | 0.63 mm |
Adhesive | 0.13 mm | 0.14 mm | 0.17 mm |
Elongation at Break | ³ 400% | ||
Tensile Strength | 45.3 N/cm | 50.8 N/cm | 60.1 N/cm |
Yield Strength | 35.9 N/cm | 43.4 N/cm | 45.8 N/cm |
Dielectric Breakdown | 32.9 KV/mm | 43.5 KV/mm | 45.2 KV/mm |
Cathodic Disbandment | 0.24 in radius 6.4 mm | ||
Volume Resistivity | 2.5 x 1012 ohm.m | ||
Water Vapor Transmission Rate | £ 0.08 gm/M2/24h | ||
Water Absorption Rate | < 0.07% | ||
Recommended Application Temperature | -50 to +600 C | ||
Color | White | ||
Available Roll Size (width x length) | 2" to 9" X 50 to 600 feet |